Setting up a CP Plus IP system can seem daunting at first, but with the right guidance, it's a straightforward process. This system combines the power of CCTV with the convenience of internet Protocol (IP), allowing you to monitor your property or business remotely. Let's dive into the step-by-step process of CP Plus IP setup.
The first step is to gather your equipment. For a basic setup, you'll need a Network Video Recorder (NVR), IP cameras, an Ethernet cable or Wi-Fi adapter, an HDMI cable (for initial setup), a mouse, and a monitor. Once you have everything ready, let's proceed with the setup.
Initial Hardware Setup
The initial setup involves connecting your hardware devices. Begin by connecting your NVR to your router using an Ethernet cable. If you're using Wi-Fi, configure the adapter as per the user manual. Next, connect your monitor and a keyboard/mouse to the NVR using their respective ports.
Power up your IP cameras and connect them to the power supply. Once the cameras boot up, you'll see a blue LED light on the front. This indicates that the camera is ready for configuration.
CP Plus IP Setup through NVR
With the hardware connected, it's time to configure the software. Turn on your NVR and access the interface through your monitor. You'll be greeted with the main menu. Navigate to "System Management" and then "Device Management".
In the "Device Management" section, click on "Add Camera". This will initiate the auto-discovery process. The NVR will detect and list all the cameras connected to your network. Select the camera you want to add and click "OK".
Configuring IP Addresses
Each IP camera will have a unique IP address. By default, CP Plus IP cameras are set to DHCP, which means the camera gets an IP address automatically from your router. However, you can also set the IP address manually.
To manually configure the IP address, go to "Camera Management" and select the desired camera. Click on "Basic Info". Here, you can set the IP address, subnet mask, gateway, and other network parameters.
Port Forwarding and Remote Access
To access your CP Plus IP cameras remotely, you need to set up port forwarding on your router. This allows external devices to connect to your camera when you're away from home.
To do this, navigate to your router's configuration interface (iptable). Look for the port forwarding or virtual servers setting. Add a rule for the ports used by your NVR (usually 34567 and 34568). Once this is done, you can access your cameras remotely using their IP address or host name.
Post-Setup and Fine-Tuning
After the initial setup, you can explore the various features of your CP Plus IP system. These include motion detection, intelligent analytics, and push notifications, among others.
To access these features, go to "System Management" and then " Events & Storage". Here, you can set up motion detection areas, schedule recording, and set up email and phone push alerts.
The CP Plus IP setup provides an advanced level of control and convenience. Whether you're at home or miles away, you can keep a watchful eye on your property or business. Happy monitoring!