CompactLogix 5380 IP Setup: Steps & Best Practices

Embarking on a journey to configure your CompactLogix 5380 for IP setup? You're in the right place. This comprehensive guide will walk you through a step-by-step process to connect your device to an IP network, ensuring a seamless and secure integration.

The CompactLogix 5380, a robust controller from the Rockwell Automation family, offers high performance and flexibility in a compact design. Before we dive in, ensure your controller is equipped with an EtherNet/IP-enabled module, such as an 1769-L32ER or 1769-NET.

Prerequisites and Components

Before you commence, gather the following components and ensure the prerequisites are met:

Electrical Installation, Computer Network, Iphone Screen, Control System, Electronic Components, Logo Design, Engineering, Electricity

a cell phone sitting on top of a desk next to a server

the diagram shows how to connect multiple routers and other devices with different types of wires

- Your CompactLogix 5380 controller
- An EtherNet/IP-enabled module
- An appropriately configured switch or router
- A computer with a web browser
- RSLogix 5000 or FactoryTalk View SE software (optional but recommended)

Checking Controller and Module Firmware

Begin by verifying that both your controller and EtherNet/IP module firmware are up-to-date. Updated firmware minimizes potential compatibility issues and ensures optimal performance.

Plc Control System Design, Programming Logic Controller Guide, Industrial Plc Control, Programmable Logic Controller Diagram, Programmable Logic Controller Schematic, Siemens Plc Programming Interface, Microcontroller Lcd Contrast Adjustment Module, Cjmcu Microcontroller Module, Real-time Control Microcontrollers Guide

the diagram shows how to use poe switch for home and office security systems, including surveillance cameras

To check the firmware version:

Press the 'System' button on your controller's faceplate.
Navigate to 'Firmware Update' and compare the current version with the latest release on Rockwell's official website.

geometry>Configuring Network Settings

The heart of the IP setup process involves configuring your CompactLogix 5380's network settings. We'll guide you through setting the IP address, subnet mask, default gateway, and DNS server details.

For the purpose of this guide, let's assume you're connecting your controller to an existing network with the following parameters:

the diagram shows how to use an ip phone in cucam, and what it is used

Top 10 power management ICs for Industry 4.0

an information poster describing the different types of electrical equipment and how they are connected to each other

the diagram shows how to connect with an internet device and other devices in this system

an electronic device is shown with instructions on the back side, and below it's description

the wiring diagram for a home theater system, including two monitors and three televisions

IP Address	Subnet Mask	Default Gateway	DNS Server
192.168.1.100	255.255.255.0	192.168.1.1	8.8.8.8

Setting the Network Mode

Before configuring IP settings, ensure your CompactLogix 5380 is set to the correct network mode:

Open the faceplate and press the 'System' button.
Navigate to 'Network' and select 'EtherNet/IP' as the network mode.

Configuring Static IP Address

We recommend setting a static IP address to avoid conflicts and ensure consistent connectivity. Follow these steps to configure a static IP:

From the previous menu, select 'IP Configuration'.
Choose 'Static IP' and enter the desired IP address, subnet mask, default gateway, and DNS server details.
Click 'Apply' to save the settings and reboot your controller.

Connecting and Testing

With IP settings configured, it's time to connect your CompactLogix 5380 to the network and verify proper communication.

the diagram shows different types of devices connected to each other, including an ethernet / ip phone

CP Plus cVMS Setup & Manual IP Camera Addition | CPPlus cVMS Auto Search not working

𝗕𝘂𝗶𝗹𝗱 𝗮 𝗦𝗺𝗮𝗿𝘁𝗲𝗿 𝗡𝗲𝘁𝘄𝗼𝗿𝗸 𝘄𝗶𝘁𝗵 𝗕𝗼𝘀𝘁𝗲𝗿 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗲𝗿𝘃𝗶ces

Integrated security for warehouses & campuses

an overview of the ip phone registration process

an overview of the different types of electronic devices and their functions in this info sheet

IPSec Encapsulating Security Payload (ESP)

Watch “How to Change A Battery in an Allen Bradley Compactlogix PAC” on YouTube

the basic switch configuration is displayed in this ad

Physical Connection

Connect an Ethernet cable from your controller's EtherNet/IP port to an available switch or router (RJ45) port.

Note: Ensure the switch or router port supports the correct network topology (half-duplex or full-duplex) and speed (10/100/1000 Mbps) for your controller.

Testing the Connection

To test the connection, use a computer on the same network to ping your controller's IP address. If successful, you should receive a response indicating proper communication.

You can also log in to your controller using RSLogix 5000 or FactoryTalk View SE to further verify the connection and begin configuring your control strategy.

And there you have it – your CompactLogix 5380 successfully configured for IP setup. Now that your controller is connected, you're ready to unleash its full potential in your automation project. Happy engineering!